Part Number Hot Search : 
KFM220M 8CKE025 SMA58 17F50C 74VHCT TDA460 10100C ZQ50K4L2
Product Description
Full Text Search
 

To Download SHD526022 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 SENSITRON SEMICONDUCTOR
TECHNICAL DATA DATA SHEET 178, REV. A Formerly part number SHD52625
SHD526022
FIXED NEGATIVE 12.0 VOLT 1.5 AMP REGULATOR
FEATURES: * ISOLATED HERMETIC PACKAGE * SIMILAR to INDUSTRY TYPE LM7912A MAXIMUM RATINGS
Parameter Input Voltage Storage Temperature Range Lead Temperature Power Dissipation (PD) Maximum Thermal Resistance Junction to Case ( JC) Maximum Thermal Resistance Junction to Ambient ( JA) Maximum Junction Temperature (TJ) Ambient Operating Temperature Range (TA) Input Voltage Range Recommended Conditions Soldering, 10 seconds TC = +25C TA = +25C IO = 5.0 mA to 1.0 A All ratings are at TA = 25C unless otherwise specified. Typical Limit -35 -65 to +150 +300 15 3.0 4.2 42 150 -55 to +125 -14.5 to -27 Units Vdc C C W W C/W C/W C C Vdc
ELECTRICAL CHARACTERISTICS
Parameter Output Voltage (VOUT) Line Regulation (VRLINE) Load Regulation (VRLOAD) Standby Current Drain (ISCD) Standby Current Drain Change w/Line (ISCD) (Line) Standby Current Drain Change w/Load (ISCD) (Load) Dropout Voltage (VDO) Peak Output Current (IO(pk)) Short Circuit Current (IOS) Ripple Rejection (VIN / VOUT) Output Noise Voltage (NO) Long Term Stability (VOUT / t) Conditions TA = +25C -55C TJ +125C VIN = -14.5V to -27V -55C TJ +125C IO = 5.0 mA to 1.5 A VIN = -14.5 V to -27 V IO = 5.0 mA to 1000 mA I = 1.0A
O
Typical -12.00
Limit -11.88 -12.12 20 32 3.5 0.8 0.5 1.8 3.3 1.2 40 120
Units V V mV mV mA mA mA V A A dB Vrms mV
56 -
TA = +25C VIN = -35V f = 120 kHz, VIN = 10V
O O
I = 5.0mA TA = +25C 10 Hz - 100kHz TA = 25C, t = 1,000
Note: Output Voltage tolerance; +/- 1% @ 25 C, +/- 2% from -55 to +80 C
* 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX 631 242 9798 * * World Wide Web - www.sensitron.com * E-mail Address - sales@sensitron.com *
SENSITRON SHD526022 DATASHEET 178 REVISION A
MECHANICAL DIMENSIONS TO-257
.150 (3.81 Dia. .140 3.56) .420 (10.67 .410 10.41) .200 (5.08 .190 4.82) .045 (1.14 .035 0.89)
.537 (13.64 .527 13.39) 1.132 (28.75 1.032 26.21)
.665 (16.89 .645 16.38)
.430 (10.92 .410 10.41)
123
.035 (0.89 .025 0.63) 3 Places
.100(2.54) BSC 2 Places
.120(3.05) BSC
PINOUT TABLE
TYPE TO - 257, -12V Regulator PIN 1 GROUND PIN 2 VIN PIN 3 VOUT
DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users' fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user's units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
* 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX 631 242 9798 * * World Wide Web - www.sensitron.com * E-mail Address - sales@sensitron.com *


▲Up To Search▲   

 
Price & Availability of SHD526022

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X